Answers for Exercises

Section 1.1: Linear Systems

1. Which of the following are linear equations? If an equation is not a linear equation, tell why.
   \[ {\bf (a)} \quad 6\,x + x\,y + 3\, z = 2; \qquad {\bf (b)} \quad 5\,a -\pi + 3\,b =0; \]
   \[ {\bf (c)} \quad \cos \left( \frac{\pi}{2} \right) x^2 -\sin (\pi )\, x\,y + 2\, z = 6; \qquad {\bf (d)} \quad \sqrt{x} -3\,y -z =1. \]
2. Solve each system of equations.
   \[ {\bf (a)} \quad \begin{cases} 2\,x + 3\,y &= 2, \\ -4\,x-y &= 1; \end{cases} \qquad {\bf (b)} \quad \begin{cases} 2\,x + 4\,y &= -4, \\ 3\,x+ 5\,y &= 1; \end{cases} \]
3. Find the point of intersection of the lines x −4y = −2 and 3x + 2y = 8.
4. Solve systems of equations:
   \[ {\bf (a)} \quad \begin{split} \phantom{x} - 3\,y +4\,z&= \phantom{-}28, \\ 2\,x-8\,y + 6\,z &= -42 , \\ -5\,x +5\,y -2\,z &= \phantom{-}56; \end{split} \qquad {\bf (b)} \quad \begin{split} 2\,x - 2\,y + z&= 145, \\ 3\,x -y + 10\,z &= 203, \\ x+ 2\,y + 6\,z &= \phantom{1}58; \end{split} \]
   \[ {\bf (c)} \quad \begin{split} 2\,x - 2\,y + z &= 75, \\ \phantom{x+} 2y + 6\,z &= 30 , \\ x + 2y +2z &= 0; \end{split} \qquad {\bf (d)} \quad \begin{split} 4\,x + 5\,y -z &= 310, \\ 2x+ 3\,y + 2z &= 0, \\ 8x+ 5\,y + 4z &= 186 . \end{split} \]
5. In the study of heat transfer, it is important to determine the steady-state temperature distribution of a thin plate when the temperature around the boundary is known (usually from an experiment or other measurment). Let us consider the plate shown in Figure below representing a cross section of a metal beam, with negligible heat flow in the direction perpendicular to the plate. Let t₁, t₂, t₃, t₄ denote the temperatures at the four interior nodes of the mesh in Figure. The temperature at a particular node is approximately equal to the average of the four nearest nodes---to the left, above, to the right, and below.

   Write a system of four equations whose solution gives estimates for the temperatures t₁, t₂, t₃, t₄.

Section 2: Matrices

Section 3: Manipulation of Matrices

Section 4: Gaussian Elimination

1. 1. Add -2 times the first row to the second row.
   2. Exchange row two and row three.
   3. Add -3 times the third row to the first row.
2. 1. The system of equations can be represented as the following matrix.
      \[ \left[ \begin{array}{cc|c} 1 & 2 & -3\\ 2 & 3 & 4 \end{array} \right] . \]
      Multiply the first line by -2 and add it to the second line.
      \[ -2*\left( 1\ ~2\ \vert\ -3\right) = \left(-2\ -4\ \vert\ 6\right) . \]
      Upon adding to the last row, we get
      \[ \left[ \begin{array}{cc|c} 1 & 2 & -3\\ 0 & -1 & 10 \end{array} \right] . \]
      From the reduced matrix, the value of x₂ appears to be
      \[ x_{2}=-10 . \]
      Substitution can be used to solve the first equation.
      \begin{eqnarray*} x_{1}+2\,x_{2}&=& -3 , \\ x_{1}+2*(-10)&=& -3 , \\ x_{1}&=& -3+20=17 \end{eqnarray*}
      Final solution: x₁ = 17, x₂ = -10.
   2. The system of equations can be represented as the following matrix.
      \[ \left[ \begin{array}{cc|c} 3 & 1 & 6\\ 3 & 3 & 2 \end{array} \right] . \]
      Multiply the first line by -1 and add it to the second line, which leads to
      \[ -1*\left( 3\ ~1\ \vert \ 6\right) = \left( -3\ -1\ \vert \ -6\right) . \]
      So
      \[ \left[ \begin{array}{cc|c} 3 & 1 & 6\\ 0 & 2 & -4 \end{array} \right] . \]
      From the reduced matrix, the value of x₂ appears to be x₂ = -2. Substitution can be used to solve the first equation.
      \begin{eqnarray*} 3x_{1}+x_{2}&=&6 , \\ 3x_{1}+(-2)&=&6 , \\ 3x_{1}&=&8 , \\ x_{1}&=&8/3 \end{eqnarray*}
      Final solution: x₁ = 8/3 and x₂ = -2.
3. 1. From the reduced matrix, the system of equations can be written as
      \[ \begin{split} x_{1}-x_{2}+2x_{3}-1x_{4}&=5 , \\ 5x_{2}-x_{3}+3x_{4}&=4, \\ 3x_{3}-x_{4}&=5, \\ x_{4}&=3. \end{split} \]
      Back substitution yields
      \begin{eqnarray*} x_{4}&=&3 , \\ 3x_{3}-x_{4}&=&5 \qquad \Longrightarrow \qquad x_{3}=3 , \\ 5x_{2}-x_{3}+3x_{4}&=&4 \qquad \Longrightarrow \qquad 5x_{2}=4-9=-5 \qquad \Longrightarrow \qquad x_{2}=-1, \\ x_{1}-x_{2}+2x_{3}-1x_{4}&=&5 \qquad \Longrightarrow \qquad x_{1}=5-1-6+4\qquad \Longrightarrow \qquad x_{1}=2. \end{eqnarray*}
      Final solution: x₁=2, x₂=-1, x₃=3, x₄=3.
   2. The matrix indicates that 0x₂=3, which is not possible. Therefore, the system is inconsistent.
4. 1. The system of equations can be represented by the following matrix.
      \[ \left[ \begin{array}{ccc|c} 3 & -2 & -1 & -1\\ 2 & -1 & 2 & 4\\ 0 & 1 & -2 & -6\\ \end{array} \right] . \]
      Multiply the first line by -⅔ and add it to the second row.
      \[ -\frac{2}{3}*\left( 3\ -2\ -1 \ \vert \ -1\right) = \left( -2\ \frac{4}{3}\ \frac{2}{3}\ \big\vert \ \frac{2}{3} \right) . \]
      Then
      \[ \left[ \begin{array}{ccc|c} 3 & -2 & -1 & -1\\ 0 & \frac{1}{3} & \frac{8}{3} & \frac{14}{3}\\ 0 & 1 & -2 & -6\\ \end{array} \right] . \]
      Multiply the second line by 3 to convert the fractions to whole numbers.
      \[ \left[ \begin{array}{ccc|c} 3 & -2 & -1 & -1\\ 0 & 1 & 8 & 14\\ 0 & 1 & -2 & -6 \end{array} \right] . \]
      Multiply the second line by -1 and add it to the third line.
      \[ -1*\left( 0\ -1\ -8 \ \big\vert \ 14 \right) = \left( 0\ 1\ 8\ \big\vert \ -14 \right) . \]
      Then
      \[ \left[ \begin{array}{ccc|c} 3 & -2 & -1 & -1\\ 0 & 1 & 8 & 14\\ 0 & 0 & -10 & -20\\ \end{array} \right] . \]
      From the reduced matrix the value of x₂ appears.
      \[ -10x_{3}=-20 \qquad \Longrightarrow \qquad x_{3}=2 \]
      Back substitution can be used to solve the system of equations.
      \[ \begin{split} x_{2}+8x_{3}&=14, \\ x_{2}+8(2)&=14, \\ x_{2}&=14-8(2)=14-16, \\ x_{2}&=-2 \end{split} \]
      \[ \begin{split} 3x_{1}+-2x_{2}-1x_{3}&=-1, \\ 3x_{1}+-2(-2)-1(2)&=-1, \\ 3x_{1}&=-1+2(-2)+1(2)=-1+-4+2=-3, \\ 3x_{1}&=-3, \\ x_{1}&=-1 \end{split} \]
      Final solution: x₁ = -1, x₂ = -2, x₃ = 2 .
   2. The system of equations can be represented by the following matrix.
      \[ \left[ \begin{array}{ccc|c} 0 & 2 & 1 & 3\\ 2 & 1 & -2 & -3\\ 4 & 4 & -3 & -4\\ \end{array} \right] . \]
      Multiply the second row by -2 and add it to the third row.
      \[ -2*\left( 2 \ ~1\ -2\ |\ -3\right) = \left( -4\ -2\ 4\ |\ 6\right) . \]
      \[ \left[ \begin{array}{ccc|c} 0 & 2 & 1 & 3\\ 2 & 1 & -2 & -3\\ 0 & 2 & 1 & 2\\ \end{array} \right] . \]
      Multiply the first row by -1 and add it to the third row.
      \[ \left[ \begin{array}{ccc|c} 0 & 2 & 1 & 3\\ 2 & 1 & -2 & -3\\ 0 & 0 & 0 & -1 \end{array} \right] . \]
      The matrix indicates that 0x₃ = -1, which is not possible. Therefore, the system is inconsistent.
5. 1. Multiplying the first row by 2 and adding it to the second row transforms A to B.
      \[ {\bf A} = \begin{bmatrix} 2 & f & 3\\ -4 & 8 & -6\\ \end{bmatrix} , \qquad {\bf B} = \begin{bmatrix} 2 & f & 3\\ 0 & -8+2f & 0 \end{bmatrix} \]
      Therefore, matrix A is consistent for all values of f.
   2. Multiplying the first row by -2 and adding it to the second row transforms matrix A to B.
      \[ {\bf A} = \begin{bmatrix} 1 & f & -3\\ 2 & 4 & -8 \end{bmatrix}, \qquad {\bf B} = \begin{bmatrix} 1 & f & -3\\ 0 & 4-2f & -2 \end{bmatrix} \]
      Therefore, the matrix is consistent if f≠2.
   3. Multiplying the first row by 2 and adding it to the second row transforms A to B.
      \[ {\bf A} = \begin{bmatrix} 2 & -1 & f\\ -4 & 2 & 6\\ \end{bmatrix} , \qquad {\bf B} = \begin{bmatrix} 2 & -1 & f\\ 0 & 0 & 6+2f\\ \end{bmatrix} . \]
      Therefore, the matrix is inconsistent for all values of f ≠ -3. When f = -3, the system has infinite many solutions.

Section 5: Reduced Row-Echelon Form

4. 1. \[ A= \begin{bmatrix} 4 & 4 & 1 & 24\\ 2 & -4 & 1 & 0\\ 5 & -4 & -5 & 12\\ \end{bmatrix} \] Multiply row 1 by 1/4. Add -2 times row 1 to row 2. \[ A= \begin{bmatrix} 1 & 1 & \frac{1}{4} & 6\\ 0 & -6 & \frac{1}{2} & -12\\ 5 & -4 & -5 & 12\\ \end{bmatrix} \] Add -5 times row 1 to row 3. Multiply row 2 by -1/6. \[ A= \begin{bmatrix} 1 & 1 & \frac{1}{4} & 6\\ 0 & 1 & -\frac{1}{12} & 2\\ 0 & -9 & -\frac{25}{4} & -18\\ \end{bmatrix} \] Add 9 times row 2 to row 3. Multiply row 3 by -1/7. \[ A= \begin{bmatrix} 1 & 1 & \frac{1}{4} & 6\\ 0 & 1 & -\frac{1}{12} & 2\\ 0 & 0 & 1 & 0\\ \end{bmatrix} \] Add 1/12 times row 3 to row 2. \[ A= \begin{bmatrix} 1 & 1 & \frac{1}{4} & 6\\ 0 & 1 & 0 & 2\\ 0 & 0 & 1 & 0\\ \end{bmatrix} \] Add -1/4 times row 3 to row 1. \[ A= \begin{bmatrix} 1 & 1 & 0 & 6\\ 0 & 1 & 0 & 2\\ 0 & 0 & 1 & 0\\ \end{bmatrix} \] Add -1 times row 2 to row 1. \[ A= \begin{bmatrix} 1 & 0 & 0 & 4\\ 0 & 1 & 0 & 2\\ 0 & 0 & 1 & 0\\ \end{bmatrix} \]
   2. \[ A= \begin{bmatrix} 2 & 3 & -1 & 24\\ 1 & 1 & 4 & 13\\ 3 & -2 & 1 & -7\\ \end{bmatrix} \] Divide row 1 by 2. Add -1 times row 1 to row 2. Add -3 times row 1 to row 3. Multiply row 2 by -2. \[ A= \begin{bmatrix} 1 & \frac{3}{2} & \frac{-1}{2} & 12\\ 0 & 1 & -9 & -2\\ 0 & \frac{-13}{2} & \frac{5}{2} & -43\\ \end{bmatrix} \] Add 13/2 times row 2 tor row 3. Multiply row 3 by -1/56. \[ A= \begin{bmatrix} 1 & \frac{3}{2} & -\frac{1}{2} & 12\\ 0 & 1 & 0 & 7\\ 0 & 0 & 1 & 1\\ \end{bmatrix} \] Add 9 times row 3 to row 2. Add 1/2 times row 3 to row 1. \[ A= $\begin{bmatrix} 1 & \frac{3}{2} & 0 & \frac{25}{2}\\ 0 & 1 & 0 & 7\\ 0 & 0 & 1 & 1\\ \end{bmatrix} \] Add -3/2 times row 2 to row 1. \[ A= $\begin{bmatrix} 1 & 0 & 0 & 2\\ 0 & 1 & 0 & 7\\ 0 & 0 & 1 & 1\\ \end{bmatrix} \]
7. 1. \[ A= \begin{bmatrix} -1 & -5 & -5 & 22\\ 4 & -5 & 4 & 19\\ 1 & 5 & -1 & -10\\ \end{bmatrix} \] Multiply row 1 by -1. Add -4 times row 1 to row 2. Add -1 times row 1 to row 3. \[ A= \begin{bmatrix} 1 & 5 & 5 & -22\\ 0 & -25 & -16 & 107\\ 0 & 0 & -6 & 12\\ \end{bmatrix} \] Multiply row 22 by -1/25. Multiply row 3 by -1/6. Add -16/25 times row 3 to row 2. \[ A= \begin{bmatrix} 1 & 5 & 5 & -22\\ 0 & 1 & 0 & -3\\ 0 & 0 & 1 & -2 \end{bmatrix} \] Add -5 times row 3 to row 1. Add -5 times row 2 to row 1. \[ A= \begin{bmatrix} 1 & 0 & 0 & 3\\ 0 & 1 & 0 & -3\\ 0 & 0 & 1 & -2 \end{bmatrix} \] Then, x₁ = 3, x₂ = -3, and x₃ = -2.
   2. \[ A= \begin{bmatrix} 1 & 2 & 2 & 2\\ 1 & 1 & 1 & 3\\ 1 & 0 & 2 & 4\\ \end{bmatrix} \] Add -1 times row 1 to row 2. Add -1 tomes row 1 to row 3. Multiply row 2 by -1. \[ A= \begin{bmatrix} 1 & 2 & 2 & 2\\ 0 & 1 & 1 & -1\\ 0 & -2 & 0 & 2 \end{bmatrix} \] Add 2 times row 2 to row 3. Multiply row 3 by 1/2. \[ A= \begin{bmatrix} 1 & 2 & 2 & 2\\ 0 & 1 & 1 & -1\\ 0 & 0 & 1 & 0\\ \end{bmatrix} \] Add -1 times row 3 to row 2. Add -2 times row 3 to row 1. \[ A= \begin{bmatrix} 1 & 2 & 0 & 2\\ 0 & 1 & 0 & -1\\ 0 & 0 & 1 & 0\\ \end{bmatrix} \] Add -2 times row 2 to row 1. \[ A= \begin{bmatrix} 1 & 0 & 0 & 4\\ 0 & 1 & 0 & -1\\ 0 & 0 & 1 & 0\\ \end{bmatrix} \] Then, x₁ = 4, x₂ = -1, and x₃ is undefined.

Section 6: Solving Systems of Linear Equations

Section 7: Linear Independence

Section 8: Bases and Dimensions

Section 11: Matrix Transformations

1. \[ \mbox{(a)}\quad \begin{bmatrix} 3 & -4 \\ 8 & 15 \\ \end{bmatrix}, \qquad \mbox{(b)}\quad \begin{bmatrix} 1 & -3 & 2 \\ 0 & 0 & 0 \\ 2 & 0 & -1 \\ -1 & 4 & -3 \\ \end{bmatrix} , \qquad \mbox{(c)}\quad \begin{bmatrix} 4 & 0 & 0 \\ 0 & 7 & 0 \\ 0 & 0 & -8 \\ \end{bmatrix} , \] \[ \mbox{(d)}\quad \begin{bmatrix} 8 & 4 & -3 \\ 10 & -9 & 12 \\ -2 & 0 & -1 \\ \end{bmatrix}, \qquad \mbox{(e)}\quad \begin{bmatrix} 2 & 0 & 2 & -2 \\ 0 & 0 & 0 & -1 \\ 2 & 0 & -1 & 0 \\ 0 & -1 & 3 & 0 \\ \end{bmatrix}. \]
2. (a) T(A + B) ≠ T(A) + T(B);   (b) T(A + B) = T(A) + T(B).
3. (a) T(cA) = cT(A), (b) T(cA) ≠ cT(A)
4. Since the transformation satisfies both axioms, the transformation is linear.
5. \[ \mbox{(a)}\quad S \circ T = \begin{bmatrix} 3 & -2 & 1 \\ 5 & 2 & -7 \\ 1 & 7 & -4 \\ \end{bmatrix} \begin{bmatrix} 1 & -4 \\ 6 & 3 \\ -2 & 4 \\ \end{bmatrix} = \begin{bmatrix} -11 & -14 \\ 31 & -42 \\ 35 & 33 \\ \end{bmatrix}; \] \[ \mbox{(b)}\quad S \circ T = \begin{bmatrix} 2 & 1 & 4 \\ 0 & 1 & 1 \\ \end{bmatrix} \begin{bmatrix} 6 & 3 & -1 & 0 \\ 1 & 1 & 0 & 4 \\ -2 & 5 & 0 & 2 \\ \end{bmatrix} = \begin{bmatrix} 5 & 27 & -2 & 12 \\ -1 & 6 & 0 & 6 \\ \end{bmatrix}, \] \[ \mbox{(c)}\quad S \circ T = \begin{bmatrix} 1 & -2 & 3 \\ 3 & -2 & 1 \\ 2 & 1 & -3 \\ \end{bmatrix} \begin{bmatrix} 1 & 2 \\ 4 & 3 \\ 2 & 4 \\ \end{bmatrix} = \begin{bmatrix} -1 & 8 \\ -3 & 4 \\ 0 & -5 \\ \end{bmatrix}. \]
6. \( \begin{bmatrix} 1&3&-5 \\ 2&-4&6 \end{bmatrix} . \)

Section 12: Plane Transformations

1. Let T₁ be a reflection through the horizontal x₁-axis. Then it has the following matrix form: \( \begin{bmatrix} 1&0 \\ 0&-1 \end{bmatrix} . \) The reflection with respect to the line x₁ = x₂ has matrix form \( \begin{bmatrix} 0&1 \\ 1&0 \end{bmatrix} . \) Their composition gives the required matrix \( T = \begin{bmatrix} 0&-1 \\ 1&0 \end{bmatrix} . \)
2. Let T₁ be a rotation by -3&ri;/4 radian. With unit vectors i = (1,0) and j = (0,1), we have T₁(i) = -(1,1)/2^½ and T₁(j) = (1,-1)/2^½. Therefore, \( T_1 = \frac{1}{\sqrt{2}} \begin{bmatrix} -1&1 \\ -1&-1 \end{bmatrix} . \) For reflection T₂, we have T₂(i) = -i and T₂(j) =j, so this matrix becomes \( T_2 = \begin{bmatrix} -1&0 \\ 0&1 \end{bmatrix} . \) Their composition gives the required matrix: \( T = T_2 T_1 = \begin{bmatrix} -1&0 \\ 0&1 \end{bmatrix} \, \frac{1}{\sqrt{2}} \begin{bmatrix} -1&1 \\ -1&-1 \end{bmatrix} = \frac{1}{\sqrt{2}} \begin{bmatrix} 1&-1 \\ -1&-1 \end{bmatrix} . \)
3. \( T = \begin{bmatrix} 1&3 \\ 0&2 \end{bmatrix} . \)
4. Because T(i) = -j and T(j) = i, the matrix is \( T = \begin{bmatrix} 0&1 \\ -1&0 \end{bmatrix} . \)
6. \( \frac{1}{\sqrt{2}} \begin{bmatrix} 1&1 \\ -1&1 \end{bmatrix} . \)

Review problems

Gaussian Elimination

1. a ≠ 0, a ≠ 1.
2. a ≠ 0, a ≠ 1, and a ≠ 3.

1. \[ \mbox{(a)} \quad \begin{bmatrix} 1 & 4 & -5 \\ -3 & 3 & -2 \\ 1 & -2 & 6 \end{bmatrix}; \qquad \mbox{(b)} \quad \begin{bmatrix} 1 & -1 & 1 \\ 3 & 1 & -1 \\ 2 & 2 & 1 \\ \end{bmatrix}; \] \[ \mbox{(c)} \quad \begin{bmatrix} 1 & 3 & 2 & 0 & 1 & 0 \\ -1 & -1 & -1 & 1 & 0 & 1 \\ 0 & 4 & 2 & 4 & 3 & 3 \\ 1 & 3 & 2 & -2 & 0 & 0 \\ \end{bmatrix}; \qquad \mbox{(d)} \quad \begin{bmatrix} 1 & 3 & 2 & 0 & 1 & 0 \\ -1 & -1 & -1 & 1 & 0 & 1 \\ 0 & 4 & 2 & 4 & 3 & 3 \\ 1 & 3 & 2 & -2 & 0 & 0 \\ \end{bmatrix} . \]
2. (a) Since the transformation satisfies both axioms, the transformation is linear;
   (b) The transformation must satisfy both axioms to be linear. Since the transformation does not satisfy either axioms, the transformation is non-linear.
   (c) As the transformation satisfies both theorems, the transformation is linear.
3. \[ \mbox{(a)} \quad \begin{bmatrix} 40 & 74 \\ 5 & 35 \\ 23 & 49 \\ \end{bmatrix}; \qquad \mbox{(b)} \quad \begin{bmatrix} 7 & 6 \\ 2 & 30 \\ 13 & 7 \\ \end{bmatrix}. \]