Preface

---

This tutorial was made solely for the purpose of education and it was designed for students taking Applied Math 0330. It is primarily for students who have very little experience or have never used Mathematica and programming before and would like to learn more of the basics for this computer algebra system. As a friendly reminder, don't forget to clear variables in use and/or the kernel. The Mathematica commands in this tutorial are all written in bold black font, while Mathematica output is in normal font.

Finally, you can copy and paste all commands into your Mathematica notebook, change the parameters, and run them because the tutorial is under the terms of the GNU General Public License (GPL). You, as the user, are free to use the scripts for your needs to learn the Mathematica program, and have the right to distribute this tutorial and refer to this tutorial as long as this tutorial is accredited appropriately. The tutorial accompanies the textbook Applied Differential Equations. The Primary Course by Vladimir Dobrushkin, CRC Press, 2015; http://www.crcpress.com/product/isbn/9781439851043

Runge--Kutta 3

---

We consider the initial value problem \( y' = f(x,y) , \quad y(x_0 ) = y_0 \) that is assumed to have a unique solution. As usual, we use a uniform grid of points \( x_n = x_0 + n\, h , \quad n= 0,1,2,\ldots , \) with fixed step size h to approximate the actual solution \( y= \phi (x) . \)

We start with the following third order algorithm credited to Kutta:

\begin{equation} \label{E35.9} y_{n+1} = y_n + \frac{h}{6}\, ( k_1 + 4 k_2 + k_3 ), \end{equation} where \[ \begin{array}{l} k_1 = f( x_n , y_n ) , \\ k_2 = f( x_n + h/2 , y_n + k_1 h/2 ) , \\ k_3 = f( x_n +h , y_n + 2h k_2 - h k_1 ) . \end{array} \]

If you want to see only the last value (or any other particular value) use its modification:

 

 

The Nystrom Algorithm

---

The Nystrom algorithm:

\begin{equation} \label{E35.nystrom} y_{n+1} =y_n + \frac{h}{8}\,(2k_1 + 3k_2 + 3k_3 ), \qquad n=0,1,2,\ldots , \end{equation} where \[ k_1 = f(x_n , y_n ), \ k_2 = f\left( x_n + \frac{2h}{3} , y_n + \frac{2h}{3}\,k_1 \right) , \ k_3 = f\left( x_n + \frac{2h}{3} , y_n + \frac{2h}{3}\,k_2 \right) ; \]

Example.

 

The Nearly Optimal Algorithm

---

The nearly optimal algorithm:

\begin{equation} \label{E35.optimal} y_{n+1} =y_n + \frac{h}{9} \,(2k_1 + 3k_2 + 4k_3 ), \qquad n=0,1,2,\ldots , \end{equation} in which the stages are computed according to \[ k_1 = f(x_n , y_n ), \quad k_2 = f \left( x_n + \frac{h}{2} , y_n + \frac{h}{2}\,k_1 \right) , \quad k_3 = f \left( x_n + \frac{3h}{4} , y_n + \frac{3h}{4}\,k_2 \right) ; \]

The same algorithm when the step size is specified:

 

The Heun Algorithm

---

Heun's algorithm (1900):

where

 

Bogacki and Shampine Approximation

---

The Bogacki--Shampine method is a method for the numerical solution of ordinary differential equations, that was proposed by the professor Lawrence F. Shampine (Southern Methodist University, Richardson, TX) and his former student Przemyslaw Bogacki in 1989. Now P. Bogacki is among the faculty at the Old Dominion University (Norfolk, VA). The Bogacki--Shampine method is a Runge--Kutta method of order three with four stages, so that it uses approximately three function evaluations per step. It has an embedded second-order method which can be used to implement adaptive step size similar to RKF45. The Bogacki--Shampine method is implemented in the ode23 function in matlab (Shampine & Reichelt 1997). For the initial value problem \( y' = f(x,y) , \quad y(x_0 ) = y_0 , \) the Bogacki--Shampine algorithm to determine approximation values y_n of the actual solution at mesh points \( x_n = x_0 + n\, h , \quad n=0,1,2,\ldots ; \) is as follows: Here z_n+1 is a second-order approximation to the exact solution. The third order method for calculating y_n+1 is due to Anthony Ralston (1965). He was born in 1930, in New York City. Anthony Ralston received his Ph.D. from the Massachusetts Institute of Technology in 1956 under the direction of M. Eric Reissner.

The Butcher tableau for the Bogacki–Shampine method is:

References:

Bogacki, Przemyslaw; Shampine, Lawrence F. (1989), "A 3(2) pair of Runge–Kutta formulas", Applied Mathematics Letters, 2 (4): 321--325, ISSN 0893-9659, doi:10.1016/0893-9659(89)90079-7.
Ralston, Anthony (1965), A First Course in Numerical Analysis, New York: McGraw-Hill.
Shampine, Lawrence F.; Reichelt, Mark W. (1997), "The Matlab ODE Suite", SIAM Journal on Scientific Computing, 18 (1): 1–22, ISSN 1064--8275, doi:10.1137/S1064827594276424.

 

 

Return to Mathematica page

Return to the main page (APMA0330)
Return to the Part 1 (Plotting)
Return to the Part 2 (First Order ODEs)
Return to the Part 3 (Numerical Methods)
Return to the Part 4 (Second and Higher Order ODEs)
Return to the Part 5 (Series and Recurrences)
Return to the Part 6 (Laplace Transform)
Return to the Part 7 (Boundary Value Problems)